voestalpine bohler Guardian 62F Manual Del Usuario página 7

1. Ensure that the helmet is always fitted with Böhler Welding approved outer and inner
protection lens and Grinding Visor.
2. These protection lenses must be replaced if broken, damaged or covered with welding
spatter or sparks to the extent that vision is impaired.
3. Outer and Inner protection lenses and the Grinding Visor are consumables and must be
replaced regularly with genuine certified spare parts.
4. The outer protection lens is loaded though the back of the flip, see above illustration.
5. The inner lens is mounted from the back into the locaters on the auto darkening filter.
Protection marked in accordance with this standard is only provided when all lens and
retention components are installed according to the list of manufactures instructions.
6. The Grinding visor is removed by pushing from the back outwards and then loaded from
the front.
7. Change dark shade from 9 to 13 to 5 to 9 or to Grind mode as desired via the external
switch.
8. Adjust the Sensitivity Time as desired by using the variable adjustment knob.
9. When the helmet is not used for 15 minutes the power will automatically shut-off.
There is no OFF switch.
All manuals and user guides at all-guides.com
REPLACING THE OUTER LENS
English
7