Dispensing Coffee; Programming The Amount Of Coffee In A Cup; Energy Saving - Caffitaly System S27 Manual De Instrucciones

Ocultar thumbs

Tabla de contenido

Idiomas disponibles

•

Raise the lever and remove the capsule holder (Fig. 1).

•

Put the capsule in the capsule holder (Fig. 2).

•

Insert the capsule holder fully and close the lever (Fig. 3).

•

Place a cup or espresso cup under the coffee dispensing spout (Fig. 7-8).

•

Brieﬂ y press the button A or B, depending on the desired coffee.

•

The pressed button blinks. Dispensing stops when the programmed amount is reached.

•

Raise the lever and remove the capsule holder (Fig. 1).

•

Flip the capsule holder to remove the capsule (Fig. 5).

•

Insert the capsule holder fully and close the lever (Fig. 3).

NB: If the capsule is not dispensed and raising the lever is difﬁ cult, it is advisable to

wait a couple of minutes until the lever is easy to open.

ATTENTION: When removing the capsule holder after dispensing, pay attention

to possible residues of hot water remaining over the capsule. Carefully remove,

keeping the capsule holder tilted (Fig. 14)

Programming the amount of coffee in a cup

•

Raise the lever and remove the capsule holder (Fig. 1).

•

Put the capsule in the capsule holder (Fig. 2).

•

Insert the capsule holder fully and close the lever (Fig. 3).

•

Place a cup or espresso cup under the coffee dispensing spout (Fig. 7-8).

•

Press and hold the desired coffee button.

•

On reaching the desired amount of coffee release the button, which will blink 3 times. The

button is now programmed. The amount of coffee dispensed can be programmed

from a minimum of 20 to a maximum of 130 ml.

•

Raise the lever and remove the capsule holder (Fig. 1).

•

Flip the capsule holder to remove the capsule (Fig. 5).

•

Insert the capsule holder fully and close the lever (Fig. 3).

The machine automatically reduces consumption after 10 minutes of non-use. The

buttons A-B-C go off. To return to the normal conditions of use, press any button or

open the lever. The appliance starts heating up.

When the buttons A-B-C light up steady, the machine is ready to use.

English