Idiomas disponibles
Idiomas disponibles
EN: Instructions for use
Read the mounting and safety instructions carefully
1. Read and keep the instructions for use
This instruction manual belongs to this car seat cover. The installation and
safety instructions contain important information on commissioning and
handling.
Read the instructions for use, especially the safety information, carefully before using
the product. Failure to observe these assembly and safety instructions can lead to
serious injuries or damage.
Keep the instructions for use for future reference. If you pass the product on to third
parties, be sure to include these assembly and safety instructions.
2. Explanation of warning symbols and notes
The following symbols and signal words are used in these operating instructions.
Warning
This signal symbol / word indicates a hazard with a medium
level of risk which, if not avoided, can result in death or serious injury.
Note
This signal word warns of possible property damage.
Information This symbol gives you useful additional information on ins-
tallation and use.
Tip
This symbol gives you additional tips on installation and use.
3. Intended use
The seat covers are designed exclusively for covering standard vehicle seats (not for
sports seats). They are intended exclusively for private use and not suitable for com-
mercial use.
Use the seat covers only as described in these operating instructions. Any other use
is considered improper and can lead to property damage or even personal injury. The
seat covers are not a children's toy.
Only install the seat covers in vehicles that are named on the type list on the back of
the packaging or in the accompanying brochure. The manufacturer or dealer assumes
no liability for damage caused by improper or incorrect use.
4. Safety instructions
Warning
Risk of death!
Correct initial assembly or attachment of the seat cover to the vehicle is
essential to guarantee the safety of the user. If the seat airbag is not in-
stalled correctly, it cannot be guaranteed that the seat airbag will eject
properly in the event of an impact.
→ Attach the seat covers as described in these operating instructions.
→ Under no circumstances may the cover openings be manipulated (no
covering, sewing or repairs yourself)
→ Reposition the seat covers if they are displaced or damaged. If this is
no longer possible due to advanced wear, the cover must be removed or
replaced.
→ On no account attach the seat covers if they are visibly damaged or
deformed.
→ Never manipulate, repair or sew the special side airbag seams on the
seat covers.
→ Headrest entries, backrest adjustment levers / wheels for backrest un-
locking or armrests must not be covered with the seat cover. Proper cu-
touts must be made. Please note the following mounting steps (point 5).
Warning
Suffocation hazard!
When children play with the seat covers, they can get caught in them or
pull them over their heads and suffocate.
→ Do not let children play with the seat covers.
Note
Risk of damage!
Improper handling of the seat covers can damage the seat covers.
→ Never place the seat covers on or near hot surfaces (e.g. stove tops).
→ Never expose the seat covers to high temperatures or the elements
(e.g. rain).
For removing and installing the headrests, please refer to the manufactu-
rer's information for your vehicle.
5. Mounting instructions
Check the contents of the package.
!
Mount the seat covers with Paul
1. This is Paul. He helps with good tips through the assembly instructions.
2. Paul's recommendation: Have useful aids such as scissors and credit card ready
before starting the installation.
A
Mount the headrest covers
1. Remove the headrest. Read the operating instructions for your vehicle or ask your
car workshop.
2. Paul's TIP: In some vehicles, the headrests can be removed more easily with the
help of a credit card that is pushed between the seat and the plastic guide.
3. If the product is equipped with a headrest cover, cover the headrest.
2
B C
Mount the front seat covers
1. Cover the seat cover from top to bottom and from front to back.
2. The seat cover is equipped with two side airbag seams and can therefore be co-
vered on the driver's and passenger's side.
3. Pull the tab through between the seat and the backrest. Guide the rubber bands
sideways past the seat.
4. Paul's tip: If you cannot pull the tab through between the seat and the backrest,
your seat may have a seat frame cover. The seat frame cladding can either be
opened for the tab, or the tab can be pushed through to the seat frame cladding.
5. Close the flap upwards with the hook and loop fastener on the backrest.
6. Fasten the rubber bands with hooks under the seat. ATTENTION: Never attach
hooks to cables or similar under the seat!
7a. If your seat is equipped with a side lever: For covers with Zipp-It: Open the side
zippers accordingly so that the side lever is freely accessible.
7b. If your seat is equipped with a side lever: For covers without Zipp-It: Cut into the
place of the side lever and expose the side lever.
8. Paul's tip: If your seat is equipped with armrests, pull the cover down to the arm-
rest. The cover must sit well at the top. Cut the cover at the point of the armrest.
Make sure that the side airbag seam is not damaged! Raise the armrest and pull it
through the cut-out opening.
9a. For covers with Zipp-It: Open the zips on the upper side of the backrest cover so
that the assembly openings of the headrest are exposed.
9b. For covers without Zipp-It: Make a cut at the location of the headrest assembly
openings and expose the assembly openings.
10. Fit the head restraints on the front seats and check that the cover is correct and
tight.
6. Cleaning
Pay attention to the textile care symbols on the sewn label.
7. Disposal
The seat covers can be disposed of with the residual waste.
Dispose of the packaging according to type. Dispose of cardboard as waste paper and
foils in the recyclable material collection.
8. Service and Support
If you have any questions about the product, please contact [email protected]
