Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Program Overview
20 sec. no activity
Retrieval mode
ID-Information
ÚÚÚ
00 Current level
ÚÚÚ
-1 History level 1
ÚÚÚ
-2 History level 2
ÚÚÚ
-3 History level 3
ÚÚÚ
-4 History level 4
ÚÚÚ
E1 Error inlet metre
ÚÚÚ
E2 Error drainage metre
10 Troubleshooting
10.1 No water flow
Cause:
Water intake closed.
Troubleshooting:
Open water intake on the upstream stop valve or inlet valve
Caution: The following faults may be remedied only by trained and authorised personnel.
!
10.2 No or low water flow in spite of open water intake
Cause:
Mains pressure too low.
Troubleshooting:
Check mains pressure.
If the fault continues in spite of adequate mains pressure, check the filter system
and filter cartridge and change if necessary.
!
the Operating and Safety Information (Chapter 3).
10.3 Leak at Screwed Connections
Cause:
Screwed connections not fitted correctly.
Troubleshooting:
Check mains pressure. Check all screwed connections and
mount according to Chapter 4.
If the fault continues, exchange filter system.
!
and the Operating and Safety Information (Chapter 3).
Operating mode
Carbonate hardness •
Capacity • By-pass • last
filter change date
1 x button
Caution: Prior to changing, read the Technical Data (Chapter 12) and
Caution: Prior to changing, read the Technical Data (Chapter 12)
30 sec. no activity =
no Parameter acceptance
Press button 4 seconds
Parameterisation
Filter system type and size
ÚÚÚ
Type of hardness (unit)
and value
ÚÚÚ
Monthly limit
ÚÚÚ
RESET
ÚÚÚ
Parameter acceptance
2 sec.
2 sec.
2 sec.
2 sec.
on inlet hose
.
7
6
17
EN
Tabla de contenido
