Cembre SD-19BR Manual De Uso página 9

2.2) Drilling machine (Ref. to Fig. 1):
1- TPM... Guard Nozzle: stainless steel threaded centering device for attachment to the guard (2).
Alternative guard nozzle are available with diff erent diameters, to suit diff erent size hole (Ref.
to § 10.2).
2 - PRM-UN detachable guard: stainless steel telescopic element, controlled by the return springs,
which provides protection for the auger. The lower end is threaded for attachment of the TPM
nozzle.
3 - Latch: rotated through 90° to remove the PRM-UN guard for easy replacement of the auger.
4 - Return springs: to assist the retraction of the auger from the sleeper on completion of the
drilling operation and to reduce operator eff ort.
5 - Depth adjusting gauge: graduated scale on the fi xed guard to determine the desired hole
depth.Automatically stops the travel of the auger at the desired depth.
6 - Transport handle: to comfortable transport the drilling machine and joining element to the
support trolley.
7 - LED work lights ON/OFF Switch: to activate or deactivate the illumination of the LED work
lights (9) on the handlebar (Ref. to § 3.2).
8 - Motor ON/OFF/ON Switch (EMERGENCY): is placed on the motor in an easily visible posi-
tion and can be rapidly activated in case of emergency (Ref. to § 3.1).
9 - High effi ciency LED work lights: enables effi cient illumination of the drilling area (e.g. in
tunnels or outdoors at night).
10 - Control handgrip: to control the drilling machine during operation (Ref. to § 3.3).
11 - CB3662L rechargeable battery: Li-Ion 36 V 6,2 Ah (LiHD Technology) (Ref. to § 4).
12 - Handgrip: left side.
13 - OLED display: switches on automatically when the machine is started and automatically
switches off after a set time of non-operation (Ref. to § 3.5).
14 - Capacitive touch button: for menu selection (Ref. to § 3.5).
15 - Electric Motor: 36 V Brushless.
16 - Emergency lever for quick auger release: if necessary, this lever allows immediate release
of the auger from the machine, which can then be removed from the working area.
17 - Fixed guard: stainless steel guard protecting the spindle, featuring a graduated depth gauge.
18 - MND spindle: featuring an automatic quick lock mechanism suitable for augers with Ø 14
mm shank.
19 - Motor start button (Ref. to § 3.3).
20 - Mechanical interlock (Ref. to § 3.3).
21 - Right signalling LED (Ref. to § 3.4).
22 - Left signalling LED (Ref. to § 3.4).
23 - Rainproof Cover: silicone cover, only for -RP drilling machine variants.
9