Tabla de contenido
Step 2: Controls
(EN)
MP3 PLAYBACK input accepts USB
(1)
connections from memory devices
with MP3 files.
LCD DISPLAY shows the status of
(2)
the MP3 file being played.
MAIN LEVEL Adjusts the
(3)
overall volume.
MP3 LEVEL independently
(4)
controls the playback level of the
currently-playing MP3 file.
PHANTOM Sends 48 V of phantom
(5)
power to the MIC/LINE inputs to
power condenser microphones.
The LED lights when the PHANTOM
button is engaged.
MP3 PLAYBACK section manages
(6)
navigation and playback of files
from a USB flash drive.
DISP(LAY)/MODE buttons control
(7)
the MP3 player's play mode and
also serve as contrast controls for
the LCD display.
MIC/LINE INPUTS Route line-
(8)
level input signals into these
combination jacks using XLR,
balanced ¼" TRS, or unbalanced
¼" TS connectors.
LEVEL 1-3 Adjusts the input
(9)
sensitivity for the MIC/LINE
combination jacks.
INSTRUMENT Press this button
(10)
to optimize the MIC/LINE 2 input
for unbalanced signals from
instruments using ¼" TS plugs.
CD INPUT Route signals from
(11)
CD players, MP3 players, DJ mixers,
and other line-level sound sources
into these RCA jacks.
LEVEL 4 Adjusts the input
(12)
sensitivity (gain) for the CD INPUT
RCA jacks.
EQ Cut or boost treble, mid, and
(13)
bass frequencies by ±15 dB.
Quick Start Guide
HEAT SINK Make sure you allow
(14)
plenty of space behind the speaker
for heat dissipation.
POWER SWITCH Turns the speaker
(15)
on and off.
POWER SOURCE Plug the included
(16)
IEC power cable into this jack.
THRU Route a signal to another
(17)
speaker or device by using a
balanced cable with a male XLR
plug. The THRU jack draws a signal
from just before the MAIN LEVEL
and EQ section, combined with the
MAIN IN signal.
LEVEL Adjust the level of the
(18)
outgoing THRU signal.
MAIN IN Connect the THRU signal
(19)
from another speaker using a
balanced cable with either a
female XLR plug or a balanced ¼"
TRS plug.
17
Tabla de contenido
