E NG LISH
3.2. Pairing the remote control or the app with the FA-15 device
FA-15 is managed via the remote control or the dedicated app. In both cases, it is necessary to perform a
pairing procedure between the FA-15 device and the remote control/app.
Important note
To avoid situations with simultaneous control by remote control and app, only one of these
two will be enabled for complete management of the FA-15 device.
•
If a remote control is paired, this will be able to control the device, while the app, once
paired, will have functionality limited to reading data (read-only mode)
If the app, once paired, is set to "exclusive mode", it will have complete management of
•
the device and any remote control that is paired will be unpaired from the system.
To pair a remote control:
1. check that the FA-15 device is switched on
2. press the [REMOTE] button on the front of the FA-15 panel once. The message "rE Ir" will appear
on the display, flashing
3. press any key on the remote control. The message "rE Ir" will appear steady on the display for a
few seconds, indicating successful pairing.
To pair the app:
1. check that the FA-15 device is switched on
2. download the app on your smartphone or tablet (see paragraph "1.8. FA-15 App") and launch it
3. press the [REMOTE] button on the front of the FA-15 panel twice. The message "rE AP" will appear
on the display for a few seconds, flashing
4. wait a few seconds until the app is paired. Once pairing is complete, the FA-15 panel will return to
the standard display and the app will show the FA-15 device data. If you wish to assign complete
control of the device to the app, set it to "exclusive mode". In this mode, any remote control paired
is disconnected.
Note
For specific use of the remote control and app, please consult paragraphs "1.6. Remote control"
and "1.7. Remote control/App functionality".
14
/ 92
0259-1060 - FA-15 User Manual - Rev03 -
FAV E RO E L EC T RO NIC S