Idiomas disponibles
Idiomas disponibles
Plaster in the installed ibox,
in case of pre-wall
installation cover the ibox
with a panel.
After the plastered wall
surface is dry seal the gap
with silicone (free from
acetic acid!) between wall
and plastic housing of the
ibox.
18
Hansgrohe · Postfach 1145 · D-77761 Schiltach · Telefon +49 (0) 78 36/51-1282 · Telefax +49 (0) 7836/511440
Apply PCI-Lastogum or
similar sealing compound
on the wall in accordance
with manufacturers
indications.
E-Mail: [email protected] · Internet: www.hansgrohe.com
Put gasket over the plastic
housing of the ibox.
Important! The gasket is not
suitable for hot glue.
