Steam Ironing - Jocel FV019158 Manual Del Usuario

STEAM IRONING

This function can be used only at higher ironing temperature.
●●
●●● or MAX
•
Fill water into the iron as described on page 3.
•
Stand the iron upright.
•
Connect he iron to a suitable mains supply outlet
•
Turn the temperature control dial(1) to the "●●", "●●●"or MAX setting
•
The pilot light turns off when the required temperature is reached. The iron is ready for use.
•
Turn the steam control knob (7) to the required position, steam starts coming out from the
holes in the sole plate.
Notice: With conventional steam ironing, water may leak from the sole plate if too low a
temperature has been select. If this happens, turn the temperature control dial (1) to the advised
position. Steam will recommence as soon as the appropriate temperature has been reached.
BURST OF STEAM
This function provides an extra amount of steam to remove stubborn wrinkles.
•
Fill the iron with water as described on page 3.
•
Turn the temperature control to the position "MAX"
•
The pilot light turns off when the required temperature is reached
•
The iron is ready for use
•
Press the Burst of Steam button (2) once
•
Steam will penetrate into the garment removing the wrinkles
•
Wait a few seconds before pressing the steam control knob again when there are stubborn
wrinkles
Usually all wrinkles can be removed within three pressings
All manuals and user guides at all-guides.com
For moderate steam
For maximum steam
- 25 -