Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
Please, read carefully this manual before the device installation.
Compliance with the requirements of this manual provides reliable operation of the
EN
device throughout the whole service life. Please, save this manual for the whole
period of service life of the device as it contains the requirements for its maintenance.
The devices represent themselves as axial centrifugal fans
designed for inlet or exhaust ventilation of the premises
heated during winter time.
The fans are made of plastic.
The delivery set consists of:
fan 1 item;
bracket 2 items;
s
crews with dowels 4 items;
u
ser's manual;
packing box.
The fans are produced for the air ducts with diameter of
100, 125, 150, 200, 250, 315 mm.
The model with a flange diameter of 150 mm are compatible
with 150 and 160 mm duct diameter.
The models with
"S"
index are equipped with the increased
capacity motor.
The models with
Q"
index are equipped with reduced capacity
motor and have low noise level and power consumption.
The models with
"R"
index are equipped with power
supply cable.
The fans are designed for connection to single phase
AC 220 240V/50 Hz network and are designed for long term
operation without disconnection from the power supply.
The transferred air should not contain dust and other solid
impurities, adhesive agents as well as fiber materials.
By type of protection against electric shock hazard the fans
are classified as the devices of Class.
II
The type of climatic performance of the device is UHL 4.2.
IPX4 sealing protection from access to hazardous parts
and water penetration.
The fan is to be stored in the manufacturer's package in the
vented premise with temperature ranging from +5°! to +40°!
and relative air humidity no more than 80% (at "=25°!).
V (V U) 100, 125, 150 fans are permitted for operation
with surrounding air temperature ranging from 0°! to +65°!,
V (V U) 200 and V
S
(V S U) 200 fans to +55°!,
V (V U) 250 fans to +50°!, V (V U) 315 and
V
S
(V S U) 315 fans to +45°!.
FANS WITH ELECTRONIC MODULE TSC
V U fans allow to change the impeller rotation speed
(air consumption) automatically depending on the
air temperature in the air duct.
Models with
" "
n
index are equipped with remote
temperature sensor of 4 m length. All fans models with
circuit module are equipped with power cable.
The following controllers are placed on the face panel
of the unit:
pre setting of impeller's rotation speed;
operating threshold of electrical thermostat.
L.E.D. indicator of thermostat operation is brought out
to the face panel of fan unit.
2
