Operating Instructions; On/Off Switch; Preset Programs - Biochef Nova Manual Del Usuario

Operating Instructions

EN

ON/OFF SWITCH

• Plug in the blender into the powerpoint. Press the ON/OFF button.
• The ON/OFF button will indicate with a RED light.

PRESET PROGRAMS

• When the blender is in stand-by mode, select the desired preset program,
then press ON/OFF to begin the programme. If at any time the blender
needs to be stopped simply select ON/OFF and operation will stop and the
Stand-By Mode will resume.
PULSE KEY
• Press "PULSE" button and release to get a single burst
of speed for each pulse until you have achieved the
desired results.
TAMPER
• The tamper will allow you to accelerate the blending
process of very thick and frozen mixtures. Using the
tamper to maintain circulation of the ingredients will
reduce the air pockets from forming and will help with
overall consistency when blending. The tamper should
only be used during operation through the lid plug
opening to avoid injury.
• Use the tamper to press ingredients into the blades as
you make ice creams, nut butters or puree fruits.
• To achieve the best results when pureeing solid
ingredients, place small portions into the jug one by
one instead of placing large quantities all at once.
Start off with a small amount of liquid and gradually
add more through the opening in the lid.
It is recommended to use PULSE for very thick
ingredients for the best result.
6