LaserLiner ThermoSpot Laser Manual Del Usuario página 8

4
°C / °F
To set the required temperature unit,
press and hold the „°C/°F" button until
the corresponding symbol appears on
the display.
5
Continuous measurement / Hold
For continuous measurement
activate the laser (see figure)
and keep the button pressed.
Release the button as soon
as the target laser pinpoints
the measurement location.
The measured value is held.
Measurement procedure notice
This infrared temperature instrument detects the temperature of various
surfaces and materials. A built-in sensor head detects the material-specific
infrared rays emitted by every object. The amount of these emissions is
determined by the material's emission coefficient (0 ... 1). This instrument
is permanently set to an emission coefficient of 0.95, which is applicable
to most organic materials as well as plastics, ceramics, wood, rubber and
stone. Please ensure that the space between the instrument and surface
to be measured is free of disturbances (steam, gas, contamination, glass).
Laser circle
The laser circle is a targeting
aid to sight the location for
the infrared measurement.
Temperature measurement is
only performed on the surface
within the laser circle.
08
EN
Laser output
Laser warning message