Where To Place The Wind & Sun Sensor; Setting Of Several Motors To One Sensor - Cherubini windtec Instrucciones

WHERE TO PLACE THE WIND & SUN SENSOR
The Windtec sensor must be positioned to the side, as close as possible to its awning, and
not above or below the awning coverage area.
RigHT

SETTING OF SEVERAL MOTORS TO ONE SENSOR

one single Windtec sensor can be used to automate a group of motorised awnings. For a
correct function, the coupled awnings must be mounted and exposed to sunlight and wind
in the same way. do not connect more then 5 motors to one wind sensor.
RigHT
I
ATTENTION!
WRong
RigHT
15
WRong
WRong
GB