Control Knob - nama SJ200 Manual Del Usuario

16

CONTROL KNOB

Ensure the control knob is on the OFF position prior to plugging in
power cord to power outlet.
[ OFF ]
POSITION
Stops the operation of
the product.
(Note: When the machine
is running and then it is
switched to OFF, it will take
3 seconds for the machine
to come to a complete
stop.)
Using the Control Knob if the juicer stops working.
[ ON ]
POSITION
Starts the motor and
makes juice.
STEP 1
Turn the control knob to [REV] and hold for 3-5 seconds and
release the knob. Repeat this 2-3 times. [REV] rotates the auger
in reverse direction to push the ingredients backwards to help
dislodge any ingredients that are stuck.
STEP 2
After you release the knob from [REV] and the machine stops
completely, turn the knob to [ON] to start juicing again. If the
juicer does not work after these steps, unplug the juicer, and
disassemble and clean the parts before operating the juicer again.
[ REV ]
POSITION
Turn and hold the knob
to REV if the juicer stops
due to a jam.
(Note: Hold the knob to REV
for 15 seconds after juicing is
completed. This will relieve
pressure in the chamber and
be easier to disassemble.)