Electrical Diagram; Product Dimensions; Maintenance And Cleaning Tips - FOTILE HYZK26-E1 Manual Del Usuario

Electrical diagram

-10-

Product dimensions

Maintenance and cleaning tips

▉ General precautions
Caution:
The used cavity, door, handle, control panel, drip tray, and door sealing rings should be
cleaned after each use, and power must be cut off before cleaning to avoid electric shock.
Cleaning can only be conducted after the cavity is cooled, and the cavity must be
completely dry before closing the door. In this way, the surface of the upper and lower
cavity can be free of grease or other dirt, which is hard to be removed. Sometimes, it may
cause the decoloration of the surface, and the grease deposition can also make the door
sealing rings brittle, thus being prone to crack.
Caution:
All surfaces need to be cleaned with a soft sponge and cloth dipped in water and a little
cleaning solution, and then they should be dried with a soft cloth. Do not use any detergent
to clean this machine. The steam under pressure will bring permanent damages to its
surface and accessories, and any loss caused thereby will not be borne by the Company.
Neither the detergents, which contain alkali, soda, acid, or chlorine, nor clean sprays,
detergents for dishwashers, or corrosive detergents, hard brushes, scouring pads, and
wire brushes should be used. In addition, any sponge stained with corrosive agents should
not be used, so as not to scratch the surface.
▉ Door gasket
Please clean and dry the door gasket after each use. Please use cleaning sponges and warm
water. As the door gasket may be perforated or cracked over time, in this case, please call the
after-sales service center of FOTILE.
▉ Steam and Bake racks
Please clean and dry the steam and bake racks after each use.
-11-