Tabla de contenido
Idiomas disponibles
Idiomas disponibles
B
Product usage
Installation
Before installing the product, please take the following factors into consideration when choosing
a location for the speaker system.
•
Where do you want the sound to be projected for the best audio experience?
•
Where is the best place for the sound technician to check the speaker system?
•
Where will the subwoofer/amplifier be located for easy access to the control panel?
•
Make sure the speaker system is placed in a dry, well-ventilated location on a stable
surface that can support the weight of the system.
IMPORTANT!
•
Before plugging in and switching on the speaker system, make sure that all
the controls are turned off or set to the minimum level.
Assembling the speaker tripod
1.
Unscrew the knob located just above the 3 legs of the tripod until it is loose.
2.
Pull the 3 legs outwards, then tighten the knob to secure the legs into place.
NOTE: Extend the tripod legs as wide as possible as this will ensure that the
speaker tripod is as stable as possible.
3.
Loosen the knob at the top of the speaker tripod until the telescopic pole extends from
the base tube.
4.
Pull the telescopic pole upwards to extend it to the desired height.
5.
Secure the telescopic pole in place by inserting the metal pin through 1 pair of holes
located on the telescopic pole. Then position the telescopic pole so that the metal pin
rests on the same base in which the telescopic tube was stored.
6.
Tighten the knob to secure the telescopic pole in place.
WARNING! Take care when assembling the speakers as they are heavy. At least
two people are required to mount the speakers onto the tripod.
Assembling the speakers
2 speaker line arrays are provided. Each set comprises 4 speakers that need to be assembled
prior to being mounted on the tripod.
28
EN
Capítulos
Tabla de contenido
Solución de problemas
