Installation Of Batteries; Basic Operation; Power On/Off; Setting Of Standby Mode - Nikkei NH2424 Manual Del Usuario

LED COLOR TV

1.5. Installation Of Batteries

2. Basic Operation

2.1. Power ON/OFF

- Insert the power cord into the appropriate socket.
- Press Power button to turn on the unit.
- Press the Power button again to turn off the TV, then return the display to standby
mode. The power indicator turns red.

2.2. Setting Of Standby Mode

- Press ( ) button to turn on the unit.
- Press ( ) button again to return the display to standby mode. The power indicator turns
red.
- Be sure not to set your TV in standby mode for a long period of time. If you will not be
using the TV for several days, disconnect the power by pulling the plug itself. Never pull on
the cord.
1. Open the back lid of the remote control.
2. Install two 7#(AAA)1.5V batteries.Ensure the
correct polarity of the batteries.
3. Cover the back lid.
If the remote control doesn't work properly
please carry out the following checks.
- Check the TV is turned on.
- Check the polarity of the batteries are correct.
- Check the batteries are not drained.
- Check the power supply is normal or the power
cord is correctly connected.
- Check there are no special fluorescent light or
neon light around.
12