Contents
3 Intended Use
4 Warnings and Safety
Precautions
7 Getting Started
11 Installing the YBT01
15 Installing the YDO01C-BT
(Option B2)
17 Establishing Data Connections
between the YBT01 or YDO01C-BT
(Option B2) and the F8T001v2 or
F8T012 from Belkin Corporation
35 Care and Maintenance
37 Specifications
38 Certificates
The following symbols are used in
these instructions:
§ indicates required steps
$ indicates steps required only under
certain conditions
> describes what happens after you have
performed a certain step
– indicates an item in a list
!
indicates a hazard
Make sure you observe the warnings
and safety precautions in their entirety
during installation and operation, as
well as while performing maintenance
and repair work on the equipment.
It is important that all personnel using
the equipment understand this informa-
tion, and have access to it at all times.
The warnings and safety precautions
can be supplemented by the equipment
operator. Make sure all operating per-
sonnel are informed of any additions to
these instructions.
Intended Use
The wireless interface from Sartorius
enables wireless data communication,
using Bluetooth® wireless technology,
between a measuring instrument and
a remote device. This remote device may
be a PC, for example, equipped with a
Bluetooth® USB adapter. With the wire-
less interface, you no longer need data
cables to connect your RS-232 data
interfaces.
The YBT01 is a Bluetooth® RS-232
adapter that can be connected to the
RS-232 port on a weighing instrument.
YDO01C-BT transmitter (Option B2)
is also a Bluetooth® RS-232 adapter,
for installation on the UniCOM interface
in a Combics indicator.
The YBT01 and YDO01C-BT (Option B2)
interfaces have a transmit power of up
to 100 milliwatts (in accordance with
Bluetooth® wireless technology specifi-
cation V1.1/Class 1).
Once the radio connection has been
established, measured values can be
processed on the PC using, for example:
– WinScale®, or
– SPEXXIS®
from Sartorius.
3