Tabla de contenido
OBSŁUGA
A. Weight
Find battery in the packet and the battery holder at the back of the scale, open the cover,
install the battery into the holder and cover it back(make sure the positive pole of the
battery upwards)
- Place the scale steadily on hard and flat surface. Clean table is best.
- Press the "ON" button to switch on the scale and it will get ready for use when the LCD
screen shows "0g" after full display， "WT" indication will show at the left corner.
- Press the "UNIT" button and you can choose between the four units "g", "oz","fl.oz" and
"ml".
- Put the container or other things you want to weigh on the platform of the scale and the
weight will be showed on the screen.
B. Weight many things
If you want to weight more kinds of products, please press "zero" button after finish
"WEIGHT" process to make the scale show "0".
C. Show the Nutritional composition data.
1. Put the food on the scale, press the CLR/MC button to make the food code 000
2. find the food code of the food you are weighing from the FOOD COOD FORM as below :
3. Press the number 1 to 9 to set the food code for the food you are weighing,
D. The total nutrition of several food
1. Finish the above process, Press the M+ button to store the data you got.
2. When M01 display on the left upper corner, it indicates a data is recorded
3. Put another food on the scale , Press the M+ button to store the data you got. When
M02 displays on the left upper corner of the LCD, it indicates 2 datas are recorded
Note:
a. the recall/memory data will be lost when you turn the scale off.
b. When the nutrition data is over the max , the LCD will display "----".
c. If the nutrition data is over 99 items , please press "CLR/MC" to clear it.
E. Show to record
Press "MR" to show all record data. LCD will show "∑" indocation, then press "MR" return to
weight.
F. Clear the memory/recall
When the food code of the LCD is 000, press the CLR/MC button , "M"will flicker. If you
need to clear data, please press"CLR/MC" again. If not, please press other button.
UWAGA
1. Please change a new battery when "Lo" appears on the screen which
EN|23
Tabla de contenido
