Wall Mounting - Amano PIX-10 Manual De Operación

All manuals and user guides at all-guides.com
Adjusting the Margin
1. Remove the Wall Mounting Bracket (see below).
2. Locate the Card Stopper
Adjustment Screw behind the
Wall Mounting Bracket on the
bottom of the machine.
3. Position a piece of paper or
time card and adjust the screw
accordingly. The print margin can
be adjusted a maximum of 22mm
(7/8"). There are ruler markings
on both sides of the base plate
to help you align the card.

Wall Mounting

1. Remove the Wall Mounting Bracket by pushing forward on the top
tabs "A" and then pushing the tabs down "B". (See below.)
2. Securely mount the bracket on the wall using three #10 wood
screws or equivalent.
3. Place the PIX-10 on the Wall Mounting Bracket by sliding the top
tabs into the slots on each side of the case. Push the PIX-10
back and down against the Wall Mounting Bracket until the PIX-10
snaps into place. Be careful not to pinch the power cord with the
bracket. Installing the cover will secure the PIX-10 to the Wall
Mounting Bracket.
Printer Frame
Wall Mounting
Bracket
Page 3
Screwdriver
Card Stopper
Adjustment
Screw
PIX-10