Tabla de contenido
Idiomas disponibles
Idiomas disponibles
How to Listen to Your Bluetooth-
enabled Music Player
1
Turn on your speaker.
2
Put the speaker in pairing mode.
Press and hold the "SOURCE/PAIR"
button until the "B/T STATUS" LED
begins to alternate red and blue.
3
Put your portable audio device in Bluetooth pairing mode.
See your device's user manual for specific instructions. Your device
will search for the inMotion Air speaker. If you are asked for a passkey,
enter 0000.
4
Make sure your portable audio device is within range of the
inMotion Air speaker.
Most Bluetooth-enabled phones and music players have a range of
approximately 10 meters (33 feet). Your portable audio device should
be within this range of the speaker.
Once paired, the "B/T SOURCE" LED will blink amber and the
"B/T STATUS" LED will slowly blink blue.
5
Start your portable audio device playing.
6
Adjust the volume.
7
Find your desired song.
10
All manuals and user guides at all-guides.com
How to Listen to Your non-Bluetooth-
enabled Portable Audio Device
If your portable audio device isn't Bluetooth-equipped, you can enjoy it
through your inMotion Air speaker as well. Just connect it via the AUX jack.
Here's how:
1
Locate a 3.5mm stereo cable (not
included).
2
Plug one end of the stereo cable
into your portable audio device.
Your portable audio device should have
either a headphone or LINE OUT jack
for you to plug into.
3
Plug the other end of the stereo
cable into your speaker's AUX jack.
The AUX jack is located on the back of the speaker.
4
Turn on your speaker.
5
Select "AUX" mode.
Press the "SOURCE/PAIR" button on your speaker or the "SOURCE"
button on the remote until the "AUX" LED lights up (amber).
6
Turn on your portable audio device and start the music playing.
7
Adjust the volume.
NOTE
You may need to adjust the portable audio device volume also. Your
portable audio device's volume should be set to approximately ¾ volume.
8
Find your desired song.
Capítulos
Tabla de contenido
