Frequency; Resistance; Diode Test; Continuity Check - Bahco BDACM1000 Manual De Usuario

ACV:
Range Resolution
4V 1mV
40V 10mV
400V 100mV
1000V 1V
Above accuracies can be guaranteed within 5%~100% of the full range.
The true RMS meter has residual value within 10 counts when the test leads are
shorten, but that will not affect the accuracy of measurement.
1. Frequency Range for ACV: 40Hz~1000Hz
2. Response for ACV: RMS measure, calibrated in rms of sine wave.
3. Overload Protection: 1000V DC or 1000V AC RMS.
4. Input Impedance (Nominal): DC voltage: >10MΩ; AC voltage: >10MΩ.

4.2.2 Frequency

Logic frequency (1Hz-1MHz)
Range Resolution
4Hz 0.001Hz
40Hz 0.01Hz
400Hz 0.1Hz
4kHz 0.001kHz
40kHz 0.01kHz
400kHz 0.1kHz
4MHz 1kHz
Accuracy
±(1.0% of rdg + 5 digits)
±(1.5% of rdg + 5 digits)
Accuracy
±(0.1% of rdg + 5digits)
Voltage inpunt >10Vpp

4.2.3 Resistance

Range Resolution
400Ω 0.1Ω
4kΩ 1Ω
40kΩ 10Ω
400kΩ 100Ω
4MΩ 1kΩ
40MΩ 10kΩ

4.2.4 Diode Test

Range Resolution
2000 V 0.001V

4.2.5 Continuity Check

Range Resolution
200Ω 0.1Ω
Description: Continuity beeper ≤50Ω

4.2.6 Capacitance

Range Resolution
4nF 1pF
40nF 10pF
400nF 100pF
4µF 1nF
40µF 10nF
400µF 100nF
4mF 1uF
Accuracy
±(0.5% of rdg + 3 digits)
±(0.5% of rdg + 2 digits)
±(1.5% of rdg + 5 digits)
Test Condition
Forward DC current approximately 1mA.
Reversed DC voltage approximately 1.5V.
Test Condition
Open circuit voltage: approx. 0.5V
Accuracy
±(5.0% of rdg + 20 digits)
±(3.0% of rdg + 15 digits)
±(5.0% of rdg + 10 digits)
EN
13