Usb Connection - Samsung SDP-900DXA Manual Del Usuario

SDP-900DXA
Connecting to output device
Connecting computer

USB connection

Connect to the USB port on your PC,
then install the supplied SDP-900DXA program.
We recommend you to connect to USB port which is attached on computer main board.
Caution
(It can make troubles in extended front-side USB port or USB hub without power in
accordance with computers.) Be sure to use the USB cable shorter than 5.0 m.
RS-232C connection
Connect the cable to the
RS-232C terminal on your PC.
RS-232C cable is not provided with the presenter.
You can obtain one from your computer dealer.
16
Page
All manuals and user guides at all-guides.com
Connect a desktop PC and the presenter using USB
cable and install the supplied program. You can see
the projected image on the PC monitor and control the
image using the program.
RS-232C connection is available for advanced user.
If you connect a PC with RS-232C cable, you should
set up your PC and make your own program to control
the projected image on PC. Ask your dealer for further
details.
Digital Presenter
Digital Presenter