01_VS470_en
24/08/04
Installation of receiver
1.
Place the receiver (5) on, or near, the second television set.
2.
Connect the receiver (5) to the second television set using the lead (6) following the same
instructions as for the transmitter.
3.
Extend the antenna on the receiver (5) and orient it toward the main TV set (TV1).
4.
Fit the AC adaptator (9V, 400mA) (7) to the receiver and plug it into a 220/240 V ~ 50 Hz
mains power supply.
! THE ANTENNA allows you to transmit and receive audio and video signals over a maximum range of
80 meters in free air environments. Inside a typical lodgment the range will be less because of signal
attenuation by building material absorption.
! THE FLEXIBLE ANTENNA permits the control of the unit whose pictures you wish to see in the
room containing the second television set (TV2).
! THE POWER SUPPLY plug fitted to the transmitter (1) is not the same as the one fitted to the
receiver (7).
TV2
10:34
Page 6
All manuals and user guides at all-guides.com
6
6
220/240V ~ 50 Hz
UNITED-
KINGDOM -
EIRE
CONTINENTAL
5
7
EUROPE
AUDIO OUT
VIDEO OUT
DC 9V
L
R