Techem split 4.1.3 Manual De Operación página 22

Display levels
The display is switched off under normal operation. Approx. 5 minutes after the last time a
key is pressed, the display is deactivated automatically. The flow rate/temperature display
is always updated every 5 sec. The meter has 4 display levels. You can switch between the
display levels using a long push of the button. A short push of the button takes you to the
next display within a level.
Some windows contain several sequences. In these windows, the screen switches to the
next sequence automatically every 2 sec.
Key for 
8
1
Primary ribbon
Sequence 1
PF
Error notification
(if applicable)
88
Segment test
PH
Heat energy
PC
Cold energy
2
P1
Due date
*
P2
Cumulated volume
P3
Flow rate
P4
Max. flow rate value
P5
Inlet temperature
P6
Outlet temperature
P7
Temperature difference
P8
Performance
P9
Max. value output [thermal
energy] (current period)
2
Metrological configuration
Sequence 1
C0
Config
C1
Configuration, energy unit
C2
Configuration, energy unit
C3
Configuration, energy unit
C4
Configuration, installation
location
22
1
Sequence 2
Due date value
[thermal energy]
Max. value output [cooling
energy] (current period)
Sequence 2
kWh
MWh
GJ
Outlet (RL)
Sequence 3
Due date value
[cooling energy]
Sequence 3