PROGRAMMING
When switching over from PETROL to GAS, the emulator does not immediately
cut off injector operation, this in order to allow the GAS to exit from the reducer
and reach induction, thus avoiding feed gaps with consequent backfiring. In
this way, during switching over, the two fuels (PETROL and GAS) will overlap for
a time that can be adjusted with a trimmer placed on the emulator's lower side.
The trimmer has been set, during the
test phase, in such a way as to have
an overlapping time that is suitable
for the majority of vehicles.
If trimmer is turned towards the left
(anti - clockwise sense), overlapping
time decreases, if turned towards the
right (clockwise sense), overlapping
time increases.
REGULATING
TRIMMER FOR
OVERLAPPING TIME
WARRANTY
The warranty certificate is available on the
website AEB (www.aeb.it) in the products
section/emulators/AEB160.
19