Safety Warnings; Technical Specifications - Vemer RGG-RGM WAVE Manual Del Usuario

All manuals and user guides at all-guides.com
1) The device should be installed by qualified personnel
2) Power supply must be equipped by bipolar circuit breaker; Connection
terminals have cross section of 1,5mm
3) Before removing the cover, isolate the power supply and make sure there is
NO power to the device
4) Before touching the terminals, make sure there is no power supply to the
electric wires
5) Install the detector in the correct position (see Positioning)
6) Do not power the instrument if any part of it is damaged
7) Danger of electrical shock or malfunctioning in case of manumission or
misuse of the device
8) Do not operate the device for longer than the time indicated in the label
The installation of the gas detector does not affect the need to comply
with all the regulations regarding the specifications, installation and use
of gas appliances, the ventilation of the rooms and the discharge of the
combustion product, as laid down in the UNI EN 1775 standards for the
application of article 3 of law no. 1083/71 and the legislation in force.
• Power supply: 230 V AC 50 Hz (-15%/+10%)
• Power absorbed: 4 VA
• Operating conditions:
• Protection level: IP42
• Noise pressure of the acoustic warning device: 85 dBA at 1 m
• Contact capacity: 8(2) A 250 V AC
Code Model
VN783700
RGM WAVE Bianco Siberian
VN784500
RGM WAVE Aluminium Raider
VN785200
RGG WAVE Bianco Siberian
VN786000
RGG WAVE Aluminium Raider

SAFETY WARNINGS

TECHNICAL SPECIFICATIONS

temperature -10 ÷ +40 °C
humidity 30 ÷ 90%
- 16 -
Gas detectors User Manual
2
Description
Methane gas detector
Methane gas detector
LPG gas detector
LPG gas detector