Care And Maintenance; Battery Replacement - MAURER 53611 Manual De Uso

10. Additional outdoor transmitters
• For having more than one additional outdoor transmitter select with the 1/2/3 switch in the battery
compartment of the outdoor transmitter for each single outdoor transmitter a different channel. The
reception of the new transmitter will be transmitted automatically to the receiver. Press and hold the
CH button on the receiver or restart the receiver according to the manual.
• The outdoor values will be shown on the display of the receiver. If you have installed more than one
outdoor transmitter, press the CH button on the receiver to change between the channels 1 to 3.
• You can also choose an alternating channel display. After the third channel, press the CH button again,
The cycle display symbol
• Press the CH button again to deactivate the alternating channel and the first outdoor transmitter will be
shown permanently.
• Once registered outdoor transmitters (channels),which are no longer needed,can be deleted manually
by pressing the CH button for three seconds.Once a new outdoor transmitter is received, there will be
another indicator.
Note:
1.Each channel can be individually registered;(e.g.:hold CH button for three seconds in channel 1,
then channel 1 will deleted and re-register,channel 2 and 3 no changed).
2.After change the batteries of registered outdoor transmitters,it need hold CH button for three
seconds to re-register the transmitter.
11. Positioning and fixing of receiver and the outdoor transmitter
• With the foldable leg at the back of the receiver, the receiver can be placed onto any flat surface or
wall mounted at the respective location by the hanging holes at the back of the unit. Avoid the vicinity
of any interfering field like computer monitors or TV sets and solid metal objects.
• With the hanging hole at the back of the outdoor transmitter, the transmitter can be wall mounted at
the respective location. Choose a shady and dry position for the outdoor transmitter. (Direct sunshine
falsifies the measurement and continuous humidity strains the electronic components needlessly).
• Check the transmission of the signal from the outdoor transmitter to the receiver (transmission range
of up to 60 m free field). Within ferro-concrete rooms (basements, superstructures), the received
signal is naturally weakened.
• If necessary choose another position for the outdoor transmitter and/or receiver.

12. Care and maintenance

• Clean the devices with a soft damp cloth. Do not use solvents or scouring agents.
• Remove the batteries and pull out the power adapter of the socket, if you do not use the products for
a long period of time.
• Keep the devices in a dry place.

12.1 Battery replacement

• Change the batteries of the outdoor transmitter, when the battery symbol appears on the display of the
outdoor values.
• Change the batteries of the basic station,when the battery symbol appears on the display of the indoor
values.
• Please note: When the batteries are changed, the contact between outdoor transmitter and receiver
must be restored,so always insert new batteries into both devices or start a manual transmitter search.
will be displayed.
-6-