Unpacking; Packing List; Assembly - Husky HU80215 Manual Del Operador

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

UNPACKiNG

This product requires assembly.
 Carefully cut the box down the sides then remove the
product and any accessories from the box. Make sure
that all items listed in the packing list are included.
wARNiNG:
Do not use this product if any parts on the Packing List
are already assembled to your product when you unpack
it. Parts on this list are not assembled to the product by
the manufacturer and require customer installation. Use
of a product that may have been improperly assembled
could result in serious personal injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-866-340-3912 for assistance.

PACKiNG LiST

Pressure Washer
Trigger Handle
25 ft. High Pressure Hose
Self-Coiling Garden Hose
Spray Wand
Nozzle (25°, soap, turbo)
Operator's Manual
wARNiNG:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
All manuals and user guides at all-guides.com

ASSEMBLY

CONNECTiNG ThE wATER SUPPLY TO ThE
PRESSURE wAShER
See Figure 4.
The water supply must come from a water main. NEVER use
hot water or water from pools, lakes, etc. For ease of use,
a self-coiling hose is provided.
NOTE: When using the self-coiling hose, be sure that the
hose does not become crimped during use as this may cause
damage to the pump.
Before connecting the garden hose to the pressure
washer:
 Run water through the hose for 30 seconds to clean any
 Inspect the screen in the water intake.
 If the screen is damaged, do not use the machine until
 If the screen is dirty, clean it before connecting the garden
To connect the garden hose to the machine:
 Attach the self-coiling hose to the pump inlet coupler.
 Straighten the garden hose.
 With the hose faucet turned completely off, attach the
Page 10 — English
wARNiNG:
Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any
such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
wARNiNG:
Do not connect to power supply until assembly is com-
plete. Failure to comply could result in accidental starting
and possible serious personal injury.
debris from the hose.
the screen has been replaced.
hose to the machine.
NOTE: There must be a minimum of 10 feet of unrestricted
hose between the pressure washer intake and the hose
faucet or shut off valve (such as a "Y" shut off connec-
tor).
end of the garden hose to the self-coiling hose. Tighten
by hand.
Tabla de contenido

Solución de problemas

loading

Tabla de contenido