Tally T2240/9 Instrucciones De Servicio página 6

Functions
It indicates the printer status, and is used to change various settings.
It is used as a paper support for cut sheet paper already printed when the
option "F-Eject" is set to OFF in the Initial Setting.
They are used for extending of the Paper Tray.
When the Ink-ribbon Cartridge is to be replaced or paper jams are to be
removed, this cover is detached to allow access to the related parts. It also
serves to protect operators from the mechanical movements of the printer.
It is used to manually feed paper forward or backward.
It is used to turn ON or OFF the power of the printer.
It is used to connect an Auto Sheet Feeder (ASF) or the Optional 2nd
Tractor.
It is used to select the appropriate type of paper to be used in the printer:
Cut Sheet Paper (upper position)
Continuous Form Feed Paper (lower position)
It is opened when Continuous Form Feed Paper is to be set. This cover is
detached when an Auto Sheet Feeder (ASF) or the Optional 2nd Tractor is
to be attached.
By aligning the right edge of the Cut Sheet Paper to this guide, an uneven
feed can be prevented.
t It is opened for inserting Cut Sheet Paper and is used as a paper support.
It is also used as a support for post-print Cut Sheet Paper when the option
"F-Eject" is set to ASF, Single or ALL in the Initial Setting.
It is used to adjust the left margin of the Cut Sheet Paper.
By pulling this lever to the front, the latch is released and the Access
Cover can be opened.
Continuous Form Feed Paper will be cut at this position. By pressing the
Tear key after printing, paper feeds up to this position.
It is used to adjust the paper-pinching strength of the printer in accordance
with the thickness of the paper to be used. As for the adjustment ranges,
Paper Thickness Adjustment
see
It is used to connect the I/O cable to the system unit.
It connects to the power cord.
It is used to reduce noise. It must be removed when the paper tray is in
upright position.
All manuals and user guides at all-guides.com
Quick start-up
, page 18.