Charging The Device - LEXIBOOK BTL010 Serie Manual De Instrucciones

ncluded:
ic sheets,
should be
itch (5) to
conds and
ectrostatic
ata. If the
n again, or
BTL010seriesIM1126_V06_217YL.indb 13

CHARGING THE DEVICE

1. Make sure the speaker is off.
2. Connect the micro USB side of the cable (included) to the
speaker and the cable's USB end to a computer.
3. When the speaker is charging, the LED (1) lights up red.
4. When the speaker is fully charged, the LED (1) turns off.
Disconnect the cable.
Warning:
- Risk of explosion if battery is incorrectly replaced. Please only
replace it with an identical or a similar battery.
- The battery should not be exposed to high temperatures, such as
sunlight, fire or anything similar.
1. Activate the Bluetooth® function on your personal device
(smartphone, MP3 player, etc.). Please refer to your device's
instruction manual on how to activate this function.
2. Turn the speaker on; the LED (1) flashes in blue.
3. Select "BTL010series" on your device to connect it to the
speaker.
Notes:
- When turned on, the speaker automatically searches for a device
that it has previously synchronized with.
- If your Bluetooth ® device requires a password, the default
password is 0000.
4. You will hear a sound when pairing is successful.
5. Use the controls on your device to listen to your desired audio
PAIRING
13
21/3/16 2:18 pm