s.r.l.
s.r.l.
s.r.l.
s.r.l.
Normal conditions read - out
6.1 Icon description
ICON
6.2 Signalling LED description
SIMBOL
6.3 Button functions
Single button functions
SIMBOL
Activates or deactivates unit operation when pressed for 3 seconds (ON/OFF).
When deactivated, the OFF message is displayed.
When the dryer is switched off using this button all digital outputs are deactivated.
Allows to enter the "Function Menu"
Pressed during normal operation shows the inlet air temperature.
When pressed during programming mode, it scrolls the parameters list or increases the displayed value.
Pressed during normal operation shows the refrigerant circuit suction pressure.
When pressed during programming mode, it scrolls the parameters list or decreases the displayed value.
Pushed and released shows the SET POINT value.
In programming mode it allows to select a parameter or confirm a value.
When pressed for more than 3 seconds during the normal operating, it performs a test of the condensate
discharge valve.
21/89
At normal operating conditions, if no alarms are present, the upper display shows the DEW
POINT temperature, the lower display shows the AMBIENT TEMPERATURE.
LED (dryer ON) is lighting.
refrigerant compressor icon (refrig. compressor ON) is lighting.
High / low pressure on refrigerant discharge Alarm (HP/LP)
High pressure on refrigerant suction Alarm (LP)
Icon ON shows "Celsius degrees"
Icon OFF shows "Fahrenheit degrees"
Refrigerant compressor energized
(Blinking when start refrigerant compressor delay activated)
Suggested Maintenance
(Icon connected to CO14 parameter)
"Function menu" activated
Displays the imminent stand-by status "SLEEP mode"
Icon connected to time parameters
(ON when in Functions or Programmation area)
STATUS
ON
ON
Condensate drain energized
Cod. 710.0103.01.01 – Rev.3B – 03.2012
DESCRIPTION
Main Alarm
(Blinking)
DESCRIPTION
Dryer energized
DESCRIPTION
ED – DXL AL
ED
ED
ED
serie
BUTTON
LED /
ICON