Kunft KC3904 WH Manual De Instrucciones página 14

7. Unscrew and remove the
8. Refit the bracket fitting the bottom hinge pin.
9. Make the middle hinge reverse 180º, then
10. Place the upper door back on. ensure the
11. Put the top cover and then screw it back.
Install door external handle (if an external handle is present)
Rear spacer
Screw the rear spacers on the back
of the unit.
Frigo-KC3904-Manual-2.indd 14
bottom hinge pin, turn the
bracket over and replace it.
replace both adjustable feet. Transfer the
lower door to the proper position.
transfer it to the left proper position. Place
the middle hinge pin in the upper hole of the
lower door and then tight the bolts.
door is horizontally and vertically aligned
so that the seal closes on all sides before
finally tightening the top hinge. Then place
the hinge in position and screw it to the top
of the unit.
unscrew
14
Screw
Screw
18/02/02 16:39