Startup; Connecting The Balance/Scale To The Rechargeable Battery Pack; Battery Power Indicator (Led); Yrb06Z - Minebea Intec YRB06Z Manual Del Usuario

4
4
Operating Instructions | Bedienungsanleitung
4

Startup

Connecting the Balance/Scale to the Startup
Rechargeable Battery Pack
Plug the cord of the rechargeable battery pack
into the power receptacle of the balance/scale as
described below.
Connecting the Balance/Scale to the
YRB 01 Z, YRB 02 Z, YRB 05 Z:
Rechargeable Battery Pack
Insert the plug of the cord into the jack on the bal-
ance/scale as shown
Plug the cord of the rechargeable battery pack
into the power receptacle of the balance/scale as
described below.

YRB06Z:

YRB 01 Z, YRB 02 Z, YRB 05 Z:
Insert the right-angle plug into the socket on the bal-
Insert the plug of the cord into the jack on the bal-
ance/scale as shown. Then tighten the slotted screw
ance/scale as shown
using a screwdriver.
YRB06Z:

Battery Power Indicator (LED)

Insert the right-angle plug into the socket on the bal-
on the YRB06Z
ance/scale as shown. Then tighten the slotted screw
using a screwdriver.
LED on continuously: 100% to approx. 20% battery
Flashing LED:
Battery Power Indicator (LED)
on the YRB06Z
LED on continuously: 100% to approx. 20% battery
Flashing LED:
When the LED flashes, the battery pack needs to be
recharged (see next page).
Recharge the battery pack promptly to prevent damage
caused by deep discharging (see footnote on page 6).
When the LED flashes, the battery pack needs to be
recharged (see next page).
Recharge the battery pack promptly to prevent damage
caused by deep discharging (see footnote on page 6).
power available
less than approx. 20% battery
power available
power available
less than approx. 20% battery
power available