LEGEND FORCE LF20212RT Guía De Uso Y Cuidado página 10

Assembly (continued)
4
Assembling the Upper Handle
□ Align the upper handle pre-drilled holes to the lower
handle pre-drilled holes. Insert M8x50 bolts (JJ) through
the inside of the handle. Insert washers (GG) and hand
tighten with star knob (II). See Figure 1-4.
GG
II
Lower
Handle
Figure 1-4
5
Assembling the Wheels
□ Insert the wheel (B) through the axle on the tiller body.
Then place the wheel pin (KK) through the hole on
wheel through the hole on the axle to secure the wheel
in place. See Figure 1-5.
B
Figure 1-5
JJ
Upper
Handle
Tiller Body
6
Assembling the Tines
□ Insert tines (E) on each side through the tine axle located on the
rear of the tiller. Align pre-drilled holes and insert clevis pin (EE)
then insert cotter pin (FF) to secure in place. See Figure 1-6.
7
Assembling the Bumper
□ Insert the bumper (F) into the front end of the tiller body just
below the engine. Align the pre-drilled holes and insert M8x20
bolts (AA) and M8 nuts (BB) and tighten. See Figure 1-7.
Tiller Body
AA
F
KK
10
Please contact 1-877-527-0313 for further assistance.
Figure 1-6
BB
Figure 1-7
HOMEDEPOT.COM
Tiller Body
EE
FF
E