Idiomas disponibles
Idiomas disponibles
6. Connect light assembly pigtails to 2-light surface
mount harness (P/N 298922-01) as shown in
FIG. 16-1.
7. Bend the unused BLACK and WHITE
wires as shown in FIG. 9-1, and wrap the
exposed ends with heat shrink tubing.
8. Reconnect power to the pump by
connecting negative (-) and
positive (+) cables to battery
(FIG.9-2). Reinstall nuts on negative (-)
and positive (+) battery terminals.
LIFT CORPORATION Sht. 9 of 36 DSG#
M-18-07
HEAT SHRINKING WIRES
NUT
NEGATIVE (-)
BATTERY CABLE
RECONNECTING BATTERY POWER
Rev. A - Date: 08/04/21
HEAT SHRINK
FIG. 9-1
POSITIVE (+)
BATTERY CABLE
POSITIVE (+)
BATTERY TERMINAL
NEGATIVE (-)
BATTERY TERMINAL
FIG. 9-2
