Idiomas disponibles
Idiomas disponibles
6. Connect light assembly pigtails to 4-light
surface mount harness (P/N 298922-02
or 298922-03) as shown in FIG. 17-1 or
FIG. 18-1.
7. Bend the unused BLACK and WHITE
wires as shown in FIG. 14-1, and wrap the
exposed ends with heat shrink tubing.
8. Reconnect power to the pump by
connecting negative (-) and positive
(+) cables to battery (FIG. 14-2).
Reinstall nuts on negative (-)
and positive (+) battery terminals.
LIFT CORPORATION Sht. 14 of 36 DSG#
M-18-07
HEAT SHRINKING WIRES
NUT
NEGATIVE (-)
BATTERY CABLE
RECONNECTING BATTERY POWER
Rev. A - Date: 08/04/21
HEAT SHRINK
FIG. 14-1
POSITIVE (+)
BATTERY CABLE
POSITIVE (+)
BATTERY TERMINAL
NEGATIVE (-)
BATTERY TERMINAL
FIG. 14-2
