Assembly; Installation Instructions; Precautions For Use; Mainteinance - Mopedia RS950 Manual De Instrucciones

8. ASSEMBLY

WARNING!
Perform these operations paying close attention to prevent injury and / or property
damage when moving the device

8.1 Installation instructions

a. Unpack the product.
b. Drill the wall as the 6 holes in the handle.
c. Insert the plastic plugs on the wall.
d. Place the handle on the wall interposing the washer.
e. Insert screws and tighten very well.
f. At this point the Safety bath handle is mounted and ready for use.

9. PRECAUTIONS FOR USE

WARNING!
Perform these operations paying close attention to prevent injury and / or property
damage when moving the device
• Before each use always check the state of wear of the mechanical parts to ensure a safe use
of the device for persons and things.
• Before each use check the correct assembly of the device, with particular attention to the
joints connecting screws.

10. MAINTEINANCE

The MOPEDIA devices by MORETTI are checked carefully and supplied with EC mark once laun-
ched on the market. For patient and physician's safety we recommend to let check the device by
the manufacturer or by laboratory authorized every 2 years. In case of repair, use only original
spare parts and accessories.
• More specifically, please check that all screws and bolts are well tightened.

11. CLEANING AND DISINFECTION

11.1 Cleaning

To clean the aid and the structure use a solution of alcohol and neutral soap (in equal parts)
mixed with water.
WARNING!
Do not use abrasive substances, acids, alcohol, chlorine-based cleaners, disinfectants and
acetone when cleaning, because these substances cause the abrasion of the plastic surfaces
and rusting of metal surfaces
The manufacture company cannot be held responsible for the damage that is caused by using
materials that could damage the product surface or corrosive chemicals during cleaning.

11.2 Disinfection

If you need to disinfect the product use a common disinfectant neutral detergent.
5