Dirna bycool green line 950 Instrucciones De Montaje página 19

950
English
CONDENSER ASSEMBLY:
1- Note:
When the installation is made with only one
person, mark the holes position according to the
indicated dimensions.
2-
Remove cover and loose the electric fan wiring
loom.
3-
Should the installation be made by two people. Place
the plastic frame, the more to the right and to the
lower side of the cab, the better, having in mind
The hoses length from the evaporator, and mark
the holes (a minimum of 6).
4-
Drill a ø9 mm hole, insert M6 rivet nuts and fix the
frame with bolts M6/100 x 30 mm.
(*)-
When the cab sheet panel is not flat, may be
necessary to supplement with spacers of 10 mm. thick
and longer M6/100 x 40 bolts.
(SEE DETAIL A)
DETALLE A
Rivet nut M6
Flatwasher Ø6,3xØ17
Plastic Support
Rear Panel of cab
Spacer 10mm.
Rear Panel of cab
4
6/100x30
LockWasher Ø6
(*)
6/100x40
(*)
(*)
ALWAYS
2 3
20
1
484
4