Tabla de contenido
Idiomas disponibles
Idiomas disponibles
OPERATION
Speakerphone operation & volume control
Press
key once to obtain a dial tone, dial your number, when you hear the called party answers the
phone. You can also answer an incoming call by pressing the
During the speakerphone operation, the user can adjust the speaker volume level by pressing the ∧ ∧ ∧ ∧ or ∨ ∨ ∨ ∨
key .Total 6 levels for selection.
NOTE: If you press
total 5 levels for selection.
Mute the mouthpiece
During a call, press MUTE key once to mute the mouthpiece and "MUTE" will show on LCD. Press MUTE key
again to get back to the call and the "MUTE" will disappear.
Caller ID – type I & II
TYPE I
After you have applied the caller ID service, you can see the caller party phone number during an incoming
ring.
TYPE II
During the conversation, the phone number of the incoming call of the third party can be seen in the unit.
This function can be worked when the user applied the Telecom service.
Auto timer
The timer will start automatically after the telephone line is engaged.
Flash (R)
Press R/CLR key to reset the line without leaving the handset.
Pause
Press RD/P key will insert a time delay of 3.6 seconds in a dialing sequence.
Pre-dialing
The unit has pre-dialing function, when you may enter and edit the number before dial it out.
The following procedure describes how to use this function:
1. In idle mode, enter the number you want to dial. During entering, you can press R/CLR key to correct the
number.
2. Press
key or
Redial function
1) Press
key or
2) Press RD/P key, the last dialed number will be dialed again.
Name matching
If you have edited the incoming messages with different names, next time with the same incoming number will
display the modify name.
All manuals and user guides at all-guides.com
key to use earpiece, you can press the ∧ ∧ ∧ ∧ or ∨ ∨ ∨ ∨ key to adjust the earpiece volume,
key once, the unit will dial out the number show on the LCD.
key.
key once.
29
Tabla de contenido
