Telstar TVV015610MD Manual De Instrucciones página 23

In addition to the hot head, the
steam occurs in other parts.
The remote controller cannot be
used (only for the existing model
of the remote controller).
The gear light flashes after start.
The steam conduit is not installed
in place.
The sealing part is damaged
The remote controller cannot be
used.
Too high or too low voltage
protection.
23
GARMENT STEAMER
TVV015610MD
Re-check whether the sealing part
is installed in place.
Please contact the professionals
for inspection and repair.
If the battery is powered off,
replace the battery.
Remote the transparent film from
the bottom of the controller.
After the power voltage is normal, it
can automatically restore heating.