General Specification; Safety Precautions - GE Baker Hughes Druck PV 212 Manual De Instrucciones

5. General Specification

INFORMATION
steel, anodized aluminum, nitrile rubber, PTFE, polypropylene, Delrin,
acrylic and nylon.
Item
Hydraulic Pressure Range
Pressure Connections
Recommended Hydraulic Fluids
Dimensions (Length x Width x Depth)
Weight (approximate)
6. Returned Goods Procedure
If the unit requires calibration or is unserviceable, return it to the nearest GE Service Centre
listed at: www.gemeasurement.com
Contact the Service Department to obtain a Return Authorization (Worldwide excluding
USA).
In the USA, obtain a Return Material Authorization [RMA].
Provide the following information on either a RGA or RMA:
• Product (i.e. PV 212)
• Serial number
• Details of defect/work to be undertaken
• Operating conditions

6.1 Safety Precautions

INFORMATION
warranty and may not guarantee further performance.
You must inform GE if the product has been in contact with any hazardous or toxic substance.
The relevant COSHH or in the USA, MSDS, references and precautions to be taken when
handling.
6 | PV 212 Instruction Manual-English
All manuals and user guides at all-guides.com
Hydraulic fluids must be compatible with stainless
Specification
PV 212-22: 0 to 700 bar (0 to 10,000 psi)
PV 212-23: 0 to 1000 bar (0 to 15,000 psi)
¼" BSP parallel female
De-mineralized water or low viscosity mineral-based
hydraulic oil.
230 mm (9.0") x 160 mm (6.25") x 70 mm (2.75")
1.45 kg (3.2 lb)
Service by unauthorized sources will affect the
© 2005 Baker Hughes, a GE company – All rights reserved.