Cleaning And Maintenance - Bresser 40-25840 Instrucciones De Uso

object, the maximum range is increased. On the reverse, the maximum range is decreased.
Measurement precision may be influenced by grass, leaves, twigs etc. covering the object. How
precisely the device has measured is displayed on the measurement bar (Fig. 3, 13).
Display System (Fig. 3)
1. Symbol for aim (Fig. 3, 9). The object to be measured should be aimed at the inner circle.
2. Distance or speed display (Fig. 3, 14). Distance and speed are indicated with maximum three digits. If "- - -" is
shown, no distance or speed can be measured.
3. Measurement units: "M" (Meters; Fig. 3, 10a) or "Y" (Yards; Fig. 3, 11a), "M/S" (Meters per second; Fig. 3,
10b) or "KM/h" (Kilometers per hour; Fig. 3, 11b)
4. The standby function will be signalized by „TQL" (Fig. 3, 12).
6. There are four operating modes available:
Standard (no symbol): function for normal light conditions and measurement distances not exceeding
155 m.
RAIN (Fig. 3, 16): function for weather and measurement distances up to 20 m.
>155 (Fig. 3, 17): function for normal light and distances over 155 m.
SPEED (Fig. 3, 18): function for normal light and speed measurement up to 300 km/h.

Cleaning and maintenance

Remove the device from it's energy source before cleaning (remove battery).
Lenses (eyepieces and/or object lenses) should be cleaned with a soft, lint-free cloth (e.g. microfibre)
- 20 -