Technical Data; Noise Data; Vibration Information - Worx WG117E Manual Original

TEchnical daTa

Type wG117E (1-designation of machinery, representative of Grass Trimmer)
Rated Voltage
Power
No Load Speed
Cutting Diameter
Line Diameter
Line Length
Machine Weight

noisE daTa

A weighted sound pressure
K
pA
A weighted sound power
Wear ear protection

VibraTion informaTion

Typical weighted vibration
wARNING: The vibration emission value during actual use of the power tool can differ
from the declared value depending on the ways in which the tool is used dependant on the
following examples and other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained
Using the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately
managed
wARNING: To be accurate, an estimation of exposure level in the actual conditions of use
should also take account of all parts of the operating cycle such as the times when the tool
is switched off and when it is running idle but not actually doing the job. This may significantly
reduce the exposure level over the total working period.
Helping to minimise your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades
2-in-1 Grass Trimmer/Edger
All manuals and user guides at all-guides.com
5.7m/s ,
2
Uncertainty K=1.5m/s
220-240V~50/60Hz
500W
9300/min
25cm
1.65mm
2X5m
2.8kg
83dB(A)
3dB(A)
96dB(A)
2
En
7