Denon Professional DN-300H Guia Del Usuario página 8

4. Tuning Buttons: In Auto mode, press one of these buttons to go to the next clear station.
If in Manual mode, press one of the buttons for the stations to go up or down in one step
increments.
5. Auto Button: Press this button to select Auto or Manual tuning for AM and FM stations.
Press the button to set to Auto and the unit will search for the next clear station to go to
when using the Tuning Up/Down buttons. Press the button again to set to Manual and
you can manually search for stations with the Tuning Up/Down buttons.
6. Band: Press this button to switch between FM and AM modes.
7. APS: Press this button to search and store available radio stations automatically. It will
search for stations with RDS (Radio Data System) broadcasts first and then search for
others.
Note: This function will overwrite any previously stored radio station presets.
8. Display Button: When in FM mode, press this button to show different operation
information on the screen when RDS data has been received. Press the Display button
once for PS (program name), again for PTY (program type), then CT (current time), and
lastly RT (information). NO PS, NO PTY, NO CT or NO RT will appear if the required
function cannot be carried out. (e.g. due to a weak signal.)
• PS (Station Name): Press the Display button until "PS" appears. The current
station name will be shown.
• PTY (Program Type): Press the Display button until "PTY" appears. The program
type will be shown.
• CT (Current Time): Press the Display button until "CT" appears on the display. The
current time will be shown (e.g. 15:30). If the display shows "WAIT CT", then it is
attempting to get the time from the station.
Note: Unless the clock is synchronized to an accurate source, the time may be
inconsistent from station to station.
• RT (Information): Press the Display button until "RT" appears. The relevant
information transmitted from the local radio station will be shown.
9. Number Buttons (1–10/10+): Press buttons 1-10/10+ on the remote control to recall a
saved preset from 1-10. To recall presets higher than 10, press the 10/10+ button on the
remote control followed by the additional number button to get to the desired preset (e.g.
to get to preset 12, select 10/10+ followed by 2). To get to preset 20, press the 10/10+
button twice.
10. Memory Button: To save a preset, press the Memory button, then press a Number button
(1–10/10+) to select location, and press the Memory button again to save the current
station to that preset number. See
11. Region: Press this button, then select the region (America/Europe/Japan) with the
Tuning Up/Down buttons, then press the Region button again to confirm the region. The
unit will then automatically power off. Press the Mute button to power on the unit or
double press the power button on the front of the unit to be set to your selected region.
Note: Changing from one Region to another will overwrite all previously stored radio
station presets.
8
All manuals and user guides at all-guides.com
Operation > Using the Radio for more information.