Tabla de contenido
Idiomas disponibles
Idiomas disponibles
wheel weights and tire chains must be used with
your snow blade for traction. These accessories are
available at your nearest Sears retail store.
Using the Snow Blade
•
Prepare the lawn tractor engine for cold weather
using instructions furnished with the lawn tractor.
•
Always begin with the transmission in first (low) gear
and gradually increase speed as required.
Do not repeatedly push snow in the same direction,
•
causing excessive build up with each successive
pass.
•
To reduce icing on the blade, allow the lawn tractor
and blade to adjust to outdoor temperature before
operating.
•
For improved snow removal performance, coat the
blade with automotive type paste wax.
CUSToMER RESPoNSIBILITIES
•
Read and follow the maintenance schedule and the
procedures listed in the maintenance section.
MAINTENANCE SCHEDULE
Fill in dates as you
complete regular service.
Check for loose fasteners
Check for worn or damaged parts
Clean Blade
Lubricate Blade
•
During the operating season, check all bolts, nuts and
hairpin cotters to be sure they are secure.
Lubrication Points
•
Lubricate all pivot points to help maintain proper
operation of blade. Apply a light coating of grease to
the straight upper portion of the lift handle rod. See
figure 24.
MAINTENANCE
X
X
X
X
X
CAUTIoN: Inspect carefully the area
to be worked before operating the snow
blade. Avoid pipes, roots, curbs or other
heavy obstructions.
CAUTIoN: Know the terrain. Avoid
exceptionally steep slopes or drop offs
which may be hidden by the snow.
Never run the snow blade into heavy
material at high speed.
CAUTIoN: Always lower the blade to
the ground before leaving the tractor.
LUBRICATE
LUBRICATE
FIGURE 24
14
Service Dates
LUBRICATE
Capítulos
Tabla de contenido
