Introduction; Features; Application; Bluetooth Connectivity - Phonic JUBI 12A DSP Manual De Usuario

INTRODUCTION

Congratulations on your purchase of the Phonic Jubi
12A DSP or Jubi 15A DSP active loudspeakers. The
Jubi's 700 Watt (continuous) amplifier uses both Class
D and AB technology to produce up to a shattering 126
dB maximum SPL. This provides sufficient power for
a wide range of venues, large and small. Jubi's stylish
polymer enclosure also improves acoustical accuracy by
minimizing distortion and diffraction. Finally, reliability and
durability was the paramount factor throughout the Jubi
DSP's development. With 700 Watts of ground shaking
power, a 2-channel on-board mixer, custom engineered
transducers, and great versatility, the Jubi active
loudspeakers simply excel.
Woofers and Tweeters Engineered Right
Unlike many other speaker manufactures that use pre-
assembled OEM woofers and tweeters, Jubi transducers
are designed from scratch, in-house, by Phonic.
Everything, from the cone pulp formula and the curvature
of the tweeter's titanium membrane to the characteristic of
the magnetic field, is uniquely Phonic, uniquely Jubi. Jubi
DSP's state-of-the-art 12" or 15" woofer has a distinctly
high BL force factor and a long-throw extension which
produce marvelously deep and defined bass traditionally
unattainable in small enclosures. The 1" compression
tweeter and 95 degree conical horn complete the Jubi
DSP's vivid, transparent sound signature.
Advanced Electronics. Advanced Reliability
With over 35 years of experience, Phonic has few
equals when it comes to advanced electrical engineering
technology. With the Jubi series, this cumulated expertise
is on display. Core features include:
● Time alignment and phase correction: In listening
tests, many notice that the Jubi seems more "real"
or more "live" than other speakers. This is because
Phonic's active electronics ensure that sounds from
the Jubi hit listeners' ears at the precise moments the
original recording intended.
● High Dampening Factor and Woofer Stabilization:
The Jubi has a high amplifier dampening factor to
ensure that the woofer reaches optimal excursion.
Additionally, Phonic engineers added circuitry to
manage the speaker's electrical feedback, in effect,
stabilizing woofer movement. The high amplifier
dampening factor and stabilization circuitry give the
Jubi its spectacular bass depth and clarity.
● Transducer Protection: Active electronics oversee
tweeter and woofer excursion, preventing audio
artifacts, distortion, and speaker damage.
● 4th order, phase-accurate, Linkwitz-Riley crossover
● Thermal protection: Precautionary feature that cuts off
the Jubi in case of overheating.
With experience and technology comes excellent
performance and reliability. But you can never be too
careful. As of the launch date, the Jubi DSP has logged
more than 1000 hours of real world and lab tests,
guaranteeing a remarkable level of reliability. From heated
ovens, freezing subzero rooms, high humidity chambers,
to electrical voltage spikes, the Jubi has endured it all.
JUBI 12A DSP / JUBI 15A DSP

FEATURES

● Remarkable sound, remarkable power, and remarkable
style in a lightweight, durable enclosure
● 700 Watts of continuous power using Class AB and D
technologies for high and low frequencies, respectively
● 126 dB maximum sound pressure level
● 12" or 15" woofer matched with 1" compression tweeter
● Internal DSP with an array of signal processors
● Flat frequency response between 53/56Hz and 20kHz
● 2 channel onboard mixer: two mic/line inputs through
combo jacks plus a mini-stereo AUX input connector
● Send speaker's main signal off to additional speakers
or amplifiers through a balanced XLR output connector
● 35mm pole mount for extended audience reach
● Impact resistant polymer enclosure with internal
bracings
● Tour grade steel grille (1.2 mm)

APPLICATION

35mm mounting point

BLUETOOTH CONNECTIVITY

1. Enter the BT menu in the DSP software and set to "on".
2. Enter your cell phone or tablet's Bluetooth setup
options to find the "Phonic.BT" as an available device.
3. If requested, the password for the Jubi DSP's Bluetooth
function is 0000. Many modern smartphones will enter
this as the default password.
4. Audio signals received through Bluetooth will be routed
to the "BT in" channel found within the DSP software.
5. To reset the connection, turn your smartphone or
tablet's Bluetooth connection off and then on again.
6. To avoid phone calls and push notifications interrupting
your audio, we advise turning your phone to "flight
mode". This may disable Bluetooth initially, but you can
typically re-activate it while remaining in flight mode.
7. When a Bluetooth connection is not established to the
Jubi DSP, the Bluetooth will appear as "BT unpair" in
the software.
1