Inserting Battery - LaserLiner ClimaPilot Manual Del Usuario

a b c d
°F °C
MAX MIN
f
1

Inserting battery

Open the battery compartment and insert battery according
to the symbols. Be sure to pay attention to polarity.
2
ON / OFF
To turn on, set the switch (5) to ON. The device
displays the ambient temperature and relative
humidity.
When switching to a measuring location with significantly
!
different temperature and humidity levels, allow the device
time to adapt!
!
For measurements outside of the measuring range, the device
displays „HI" or „LO".
3
Dew point display
By briefly pressing the „MODE" button, the measured dew point
is displayed.
4
MAX / MIN
To determine the maximum or minimum measured values during a
measurement, press and hold the „MAX / MIN" button until either
„MAX" or „MIN" appear on the display. The normal measuring
mode is set when no function flashes on the display.
!
Switching off the device deletes the min/max values.
06
EN
a
Display of MAX values
b Display of MIN values
RH
c Measurement in °F
e
d
Measurement in °C
%
e Relative humidity in %rH
f Room temperature /
dew point display
1x LR44 button cell
1
2
3
ON OFF