Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
Legend
H - Hour hand
M - Minute hand
S - Seconds hand
W - Retrograde weekday indicator
D - Big Date display
Crown positions:
Position 1: Normal function. Crown pushed against case. (Watch runs)
Position 2: Position for Quick Change of Big Date. Rotate crown
counterclockwise. (Watch continues to run)
Position 3: Time/Weekday setting. (Watch stops)
These 3-hand quartz models feature a pie-shaped Retrograde Weekday
indicator, and a Big Date display (an oversized date window with two
single-digit disks that rotate independently of one another) with direct
advance from 31 to 01.
All manuals and user guides at all-guides.com
RETROGRADE DAY MODELS
Includes Quest 3-hand Retrograde Weekday models with Big Date
TIME/DATE SETTING
To set the Time:
1. Pull crown out to position 3; watch stops.
2. Turn crown in either direction until hands indicate desired time.
3. Push crown back in to position 1; watch restarts.
To correct the Retrograde Weekday Setting:
1. Pull crown out to position 3; watch stops.
2. Turn crown clockwise, advancing hands past midnight one or more
times, until retrograde hand W indicates correct day of week.
NOTE: Big Date display D will advance by one each time the
hands pass midnight.
3. Push crown back in to position 1; watch restarts.
To set the Big Date (Quick Change Mode):
1. Pull crown out to position 2; watch continues to run.
2. Turn crown counterclockwise to advance date in Big Date display D.
3. When desired date is displayed in D, push crown back in to position 1.
NOTES: If you turn the crown too rapidly during Date Setting in Quick
Change Mode, you may inadvertently advance past desired date. If this
happens, continue to turn crown counterclockwise, advancing through
dates past 31 to 01, then on to correct date.
Each day during the calendar "jump phase" – the hours between 10:00
pm and 12:00 midnight – the Big Date will advance automatically. It may
be adjusted manually during these hours; however it must be set to the
following day: the date will not automatically change at midnight if it has
been manually adjusted during the jump phase.
Manuales relacionados para Movado Esq
Resumen de contenidos para Movado Esq
- Página 1 All manuals and user guides at all-guides.com RETROGRADE DAY MODELS Includes Quest 3-hand Retrograde Weekday models with Big Date TIME/DATE SETTING To set the Time: 1. Pull crown out to position 3; watch stops. 2. Turn crown in either direction until hands indicate desired time. 3.
- Página 2 All manuals and user guides at all-guides.com MODELOS CON DÍA RETRÓGRADO Incluye los modelos de 3 manecillas con día de la semana retrógrado y fecha grande de la colección Quest PROGRAMACIÓN DE LA HORA/FECHA Para ijar la hora: 1. Tire la corona hasta la posición 3; el reloj se detiene. 2.
- Página 3 All manuals and user guides at all-guides.com MODÈLES À JOURS RÉTROGRADES Comprend les modèles à jours de la semaine rétrogrades à 3 aiguilles Quest avec date grand format RÉGLAGE DE L’HEURE ET DE LA DATE Pour régler l’heure: 1. Tirer la couronne jusqu’en position 3; la montre s’arrête. 2.