Clearing Blockages - Black and Decker LCSB2140 Manual De Instrucciones

• Do not position the chute deflector /
guard too far downward as this can
cause a gap (28) to appear between
the deflector and discharge chute as
shown in figure 17.
17
28

ClEARING blOCkAGES

WARNING:
Release the bail
handle (2), remove the safety key (3)
before making any adjustments,
inspecting, services, changing of
accessories, cleaning the snow mover,
and the like. Any operation should be
performed only after the revolving parts
inside the snow mover have come to a
full stop.
Heavy wet snow may accumulate on the
inside of the discharge chute or in the
auger housing. If discharge performance
drops or auger jams:
• Release the bail handle (2), remove the
safety key (3) and remove the battery.
• Inspect the discharge chute and auger
housing for clogs and jams.
• Use attached clean out stick (16) to
remove clogs and jams. Store clean out
stick on snow mover.
WARNING:
DO NOT ATTEmpT
TO ClEAR JAmS OR ClOGS WITH
yOUR HANDS. If a part freezes while the
snow mover is in use, stop the snow
mover, remove the battery and safety
key. Free all parts before restarting or
operating the snow mover.
ACCESSORIES
WARNING:
The use of any
accessory not recommended for use with
this tool could be hazardous.
Recommended accessories for use with
your snow mover are available from your
local Black+Decker dealer or authorized
service center. If you need assistance
regarding accessories, please call:
1-800-544-6986
All manuals and user guides at all-guides.com
mAINTENANCE
handle (2), remove the safety key (3)
before making any adjustments,
inspecting, services, changing of
accessories, cleaning the snow mover,
and the like. Any operation should be
performed only after the revolving parts
inside the snow mover have come to a
full stop.
28
ImpORTANT: To assure product SAFETY
and RELIABILITY, repairs, maintenance
and adjustment should be performed
by authorized BLACK+DECKER
service centers or other qualified
service organizations, always using
BLACK+DECKER replacement parts.
When servicing use ONly IDENTICAl
REplACEmENT pARTS.
lUbRICATION
The snow mover is lubricated during
assembly at the manufacturing facility.
Lubricating the moving parts of the snow
mover is unnecessary and may cause
damage to the unit.
STORAGE
1. Remove the battery and safety key
2. Wipe off excess moisture on the snow
3. Inspect the snow mover carefully for
4. Store the unit in a locked, dry place
The RbRC
The RBRC® (Rechargeable
Battery Recycling Corp oration)
Seal on the nickel cadmium,
nickel metal hydride or lithium-
ionbatteries (or battery packs) indicates
that the costs to recycle these batteries
(or battery packs) at the end of their
useful life have already been paid by
BLACK+DECKER. In some areas, it is
illegal to place spent nickel cadmium,
nickel metal hydride or lithium-ion
batteries in the trash or municipal solid
waste stream and the Call 2 Recycle®
program provides an environmentally
conscious alternative.
Call 2 Recycle, Inc., in cooperation with
BLACK+DECKER and other battery
users, has established the program in the
United States and Canada to facilitate the
collection of spent nickel cadmium, nickel
11
WARNING:
Release the bail
from the snow mover.
mover before storing or transporting.
Ensure the unit is fully secured when
transporting.
worn, loose, or damaged parts. Check
bolts and screws and tighten if needed.
out of the reach of children to prevent
unauthorized use.
®
Seal